[bdNOG] CACTI Graph Issue
Paul S.
contact at winterei.se
Sat Dec 12 13:19:49 BDT 2015
You might want to look into Observium, far easier to configure and far
more intuitive than Cacti.
On 12/12/2015 04:06 PM, Mohammad Shahjahan wrote:
> Dear Sir,
>
> i have removed '#' and restart crond service. the problem is remain same.
>
> --------------------------------------------------------
> *Engr. Mohammad Shahjahan*
> Member of Institute of Engineer Bangladesh
> Membership Number: M/31195
> Chittagong, Bangladesh
> Contact Information: +8801752789798
> --------------------------------------------------------
>
>
> ------------------------------------------------------------------------
> From: me at anuragbhatia.com
> Date: Sat, 12 Dec 2015 12:28:42 +0530
> Subject: Re: [bdNOG] CACTI Graph Issue
> To: bunty.ctg at hotmail.com
> CC: nog at bdnog.org
>
> Hi
>
>
> If you have what you exactly posted then it seems like a disabled
> cron :)
>
>
> Remove hash (#) before */5..... and then it will actually run. It
> seems commented (disabled) as of now.
>
> On Sat, Dec 12, 2015 at 12:27 PM, Mohammad Shahjahan
> <bunty.ctg at hotmail.com <mailto:bunty.ctg at hotmail.com>> wrote:
>
> Dear Sir,
>
> Yes it just showing zero data but GUI graph is showing.
> I have configured cronjob as below
>
> # vi /etc/cron.d/cacti
> #*/5 * * * * cacti /usr/bin/php /usr/share/cacti/poller.php >
> /dev/null 2>&1
>
>
> --------------------------------------------------------
> *Engr. Mohammad Shahjahan*
> Member of Institute of Engineer Bangladesh
> Membership Number: M/31195
> Chittagong, Bangladesh
> Contact Information: +8801752789798
> --------------------------------------------------------
>
>
> ------------------------------------------------------------------------
> From: me at anuragbhatia.com <mailto:me at anuragbhatia.com>
> Date: Sat, 12 Dec 2015 12:22:56 +0530
>
> Subject: Re: [bdNOG] CACTI Graph Issue
> To: bunty.ctg at hotmail.com <mailto:bunty.ctg at hotmail.com>
> CC: nog at bdnog.org <mailto:nog at bdnog.org>
>
> This means it is OK and able to fetch data.
>
>
> What exactly you see in graphs - just blank graphs? If so, please
> ensure that you have cronjob configured to do polling every 5mins
> or so.
>
>
>
>
> On Sat, Dec 12, 2015 at 12:17 PM, Mohammad Shahjahan
> <bunty.ctg at hotmail.com <mailto:bunty.ctg at hotmail.com>> wrote:
>
>
> Dear Sir,
>
> For specific interface i have got the following log:
>
> RRDTool Command:
>
> /bin/rrdtool graph - \
> --imgformat=PNG \
> --start='-86400' \
> --end='-300' \
> --title='SHAHJAHAN-DESK - Traffic - Po1' \
> --rigid \
> --base='1000' \
> --height='120' \
> --width='500' \
> --alt-autoscale-max \
> --lower-limit='0' \
> --vertical-label='bits per second' \
> --slope-mode \
> --font TITLE:10: \
> --font AXIS:7: \
> --font LEGEND:8: \
> --font UNIT:7: \
> DEF:a='/usr/share/cacti/rra/shahjahan-desk_traffic_in_27.rrd':'traffic_in':AVERAGE \
> DEF:b='/usr/share/cacti/rra/shahjahan-desk_traffic_in_27.rrd':'traffic_out':AVERAGE \
> CDEF:cdefa='a,8,*' \
> CDEF:cdefe='b,8,*' \
> AREA:cdefa#00CF00FF:'Inbound' \
> GPRINT:cdefa:LAST:' Current\:%8.2lf %s' \
> GPRINT:cdefa:AVERAGE:'Average\:%8.2lf %s' \
> GPRINT:cdefa:MAX:'Maximum\:%8.2lf %s\n' \
> LINE1:cdefe#002A97FF:'Outbound' \
> GPRINT:cdefe:LAST:'Current\:%8.2lf %s' \
> GPRINT:cdefe:AVERAGE:'Average\:%8.2lf %s' \
> GPRINT:cdefe:MAX:'Maximum\:%8.2lf %s\n'
>
> RRDTool Says:
>
> OK
>
>
> --------------------------------------------------------
> *Engr. Mohammad Shahjahan*
> Member of Institute of Engineer Bangladesh
> Membership Number: M/31195
> Chittagong, Bangladesh
> Contact Information: +8801752789798
> --------------------------------------------------------
>
>
> ------------------------------------------------------------------------
> From: me at anuragbhatia.com <mailto:me at anuragbhatia.com>
> Date: Sat, 12 Dec 2015 12:14:01 +0530
> Subject: Re: [bdNOG] CACTI Graph Issue
> To: bunty.ctg at hotmail.com <mailto:bunty.ctg at hotmail.com>
> CC: nog at bdnog.org <mailto:nog at bdnog.org>
>
>
> Dear Mohammad
>
>
> You can try opening Console > Graph Management > select any
> graph which is failing.
>
> Next, click on "debug graph" on top right and that should give
> you basic idea on why it's failing.
>
>
>
>
>
>
> On Sat, Dec 12, 2015 at 12:09 PM, Mohammad Shahjahan
> <bunty.ctg at hotmail.com <mailto:bunty.ctg at hotmail.com>> wrote:
>
> Dear Brother,
>
> I have configured cacti server in CentOS 7 without any
> error. But i am not able to see any graph result.
>
> I need your help.
>
> Thank you so much in advanced.
> --------------------------------------------------------
> *Engr. Mohammad Shahjahan*
> Member of Institute of Engineer Bangladesh
> Membership Number: M/31195
> Chittagong, Bangladesh
> Contact Information: +8801752789798
> --------------------------------------------------------
>
> _______________________________________________
> nog mailing list
> nog at bdnog.org <mailto:nog at bdnog.org>
> http://mailman.bdnog.org/mailman/listinfo/nog
>
>
>
>
> --
>
>
> Anurag Bhatia
> anuragbhatia.com <http://anuragbhatia.com>
>
>
> PGP Key Fingerprint: 3115 677D 2E94 B696 651B 870C C06D D524
> 245E 58E2
>
>
>
>
> --
>
>
> Anurag Bhatia
> anuragbhatia.com <http://anuragbhatia.com>
>
>
> PGP Key Fingerprint: 3115 677D 2E94 B696 651B 870C C06D D524 245E 58E2
>
>
>
>
> --
>
>
> Anurag Bhatia
> anuragbhatia.com <http://anuragbhatia.com>
>
>
> PGP Key Fingerprint: 3115 677D 2E94 B696 651B 870C C06D D524 245E 58E2
>
>
> _______________________________________________
> nog mailing list
> nog at bdnog.org
> http://mailman.bdnog.org/mailman/listinfo/nog
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.bdnog.org/pipermail/nog/attachments/20151212/2c5814eb/attachment-0001.html>
More information about the nog
mailing list